Checklist: RoHS Compliance Verification for PCB Imports

Use this audit checklist to verify RoHS compliance for imported PCBs. It covers material declaration, certificate review, testing, and supplier follow-up to reduce the risk of non-compliant components reaching the market.
- Request a full material declaration and RoHS certificate from the supplier before placing an order.
- Verify that the declared substance list matches the actual PCB construction, including solder, flux, and coating materials.
- Use third-party testing and traceability checks when the supplier history or documentation is unclear.
- Keep all compliance records and supplier declarations in a searchable file for future audits.
What must appear in the supplier’s RoHS declaration
Start with the paper trail. Before the first board arrives, request a written RoHS declaration from the supplier. This document should list every material used in the PCB and state that each substance meets the restricted substance limits. A verbal assurance from a sales representative does not hold up in an audit or a customer qualification process. The written statement serves as the baseline for your compliance records and provides a legal reference if a dispute arises over material sourcing.
A useful declaration includes:
- The PCB manufacturer name and address.
- The date the declaration was issued.
- The specific board revision or part number covered.
- A list of every material in the board, including copper foil, solder, flux, solder mask, and conformal coating.
- The restricted substances checked, such as lead, mercury, cadmium, hexavalent chromium, and specific brominated flame retardants.
- The test method or standard used, if applicable.
- A statement that the materials were sourced from compliant suppliers.
The part number detail is critical. A declaration that covers a “family” of boards is often too vague for strict compliance needs. If you order multiple revisions of the same board, the materials may change between revisions. A declaration that lists “Revision A” and “Revision B” together without distinguishing the material changes creates risk. If a revision changes the laminate type or the solder alloy, the declaration must reflect that change.
Red flags to watch:
- The declaration covers only “PCB materials” but does not list solder, flux, or coating.
- The date is older than the production run you are receiving.
- The document says “RoHS compliant” without listing the restricted substances.
- The supplier refuses to provide a declaration for a specific part number.
How to verify the material declaration matches the board
A material declaration is only as good as the match between the document and the physical board. Compare the declared list against the actual construction. The declaration should not be a generic template that the supplier reuses for every order. It must align with the specific stackup and finishing process you specified in your job order.
For a typical multilayer board, the declaration should cover:
- Copper foil and solder.
- Flux or fluxless solder.
- Solder mask and silkscreen.
- Adhesive film and laminate material.
- Conformal coating, if present.
Ask the supplier to provide a bill of materials for the board. If the board uses special adhesives or coatings, those must appear in the declaration. A common mistake is a declaration that lists the laminate and copper but omits the solder paste or flux. That omission means the declaration is incomplete. The solder paste and flux are often the most complex materials in the stack, containing various alloys, wetting agents, and cleaning agents. If these are not declared, you cannot verify their compliance.
When the board has a specific finishing, such as ENIG or OSP, the declaration must address the chemicals used in that process. For example, electroless nickel immersion gold involves nickel and gold plating solutions. The declaration should confirm that the plating bath does not contain restricted hexavalent chromium or other prohibited substances. Similarly, if the board uses a special conformal coating, the declaration must identify the resin type and any flame retardants or UV stabilizers added to the formulation.
Red flags to watch:
- The declared laminate type does not match the board marking or the supplier’s standard product list.
- The supplier offers a generic declaration that covers many part numbers with no specific details.
- The declaration lists a coating that is not visible on the board or is not typical for the board type.
Which test results to request and how to read them
When the supplier cannot provide a full declaration, ask for test reports. Not all test reports are equal. A valid RoHS test report should include:
- The test lab name and accreditation status.
- The sample description, including part number and date.
- The test method used.
- The results for each restricted substance.
- The detection limit, if the substance was not detected.
The report should state the substance concentration in parts per million. If a substance is below the detection limit, the report should say “not detected” or show a value below the limit. Avoid reports that only show “pass” without numerical values. A “pass” label is not data. It tells you the sample was tested and the result was within limits, but it does not tell you the magnitude of the result. Without numerical values, you cannot track trends over time or compare results between different suppliers.
The detection limit is a key metric. If a report shows a detection limit of 100 parts per million and the result is “not detected,” you know the concentration is below 100 parts per million. If the report shows a detection limit of 10 parts per million and the result is 5 parts per million, you have a precise measurement. This precision matters when you are trying to ensure that materials meet strict internal limits or customer requirements that go beyond the minimum regulatory thresholds.
Red flags to watch:
- The test report is from an unknown or unaccredited lab.
- The sample description does not match the board you are importing.
- The report lacks a detection limit or only shows pass/fail.
- The report is older than the production run.
How to handle solder, flux, and coating materials
Solder, flux, and coating are where most RoHS issues appear. Solder paste and flux can contain lead, tin, and other metals. Coatings can contain flame retardants or other restricted substances. Ask the supplier to provide separate declarations for these materials. The main board declaration often summarizes these components, but separate declarations provide the level of detail needed for verification.
A typical solder declaration should list the alloy composition. For example, it may state that the solder is 96.5 percent tin and 3.5 percent copper. It should also state that the flux is free of restricted substances. If the supplier uses a fluxed solder, the flux material must be declared separately. The flux often contains organic acids or other wetting agents that may contain trace amounts of restricted elements. Even if the solder alloy is compliant, a non-compliant flux can make the final product non-compliant.
Coatings are another area of concern. Conformal coatings are often applied to protect the board from moisture and dust. Some coatings contain polyurethane resins, while others use acrylics or silicates. Flame retardants are sometimes added to these coatings to meet fire safety standards. These additives can include brominated compounds, which are restricted under RoHS. The declaration must name the specific flame retardant or additive used. A generic statement that “the coating is RoHS compliant” is insufficient. You need to know the exact chemical composition to verify compliance.
Red flags to watch:
- The supplier says “lead-free” but does not provide the alloy composition.
- The flux declaration is missing or does not list the restricted substances.
- The coating declaration does not name the specific flame retardant or additive used.
When to use third-party testing and traceability
Third-party testing is a strong tool when the supplier history is unclear or when the declaration is incomplete. Do not rely on a single test. Use multiple points of verification. If the supplier provides a declaration but no test report, ask for a sample of the board to be sent to an independent lab. This is particularly useful when you are working with a new supplier or when you are importing from a region with less transparency in supply chains.
A practical approach:
- Review the supplier’s declaration and test reports.
- Check the supplier’s compliance history.
- If any document is missing or unclear, send a sample to an accredited lab.
- Keep the test report and sample identification together.
Traceability matters. If a test fails, you need to know which batch of boards is affected. Ask the supplier to include batch or lot numbers on the board and in the documentation. Without lot numbers, you cannot isolate the non-compliant material. The lot number should be printed on the board or provided in a separate manifest that links the physical board to the material declaration and test report. This allows you to quarantine affected boards and notify customers if necessary.
Red flags to watch:
- The supplier cannot provide lot or batch numbers.
- The supplier refuses to allow third-party testing.
- The supplier changes the material declaration after you request testing.
How to store and manage compliance records
Keep all compliance documents in a searchable file. A single folder per supplier, with subfolders by part number and date, works well. Store the declaration, test reports, bill of materials, and any correspondence with the supplier. This structure allows you to quickly locate the specific documents needed for a customer audit or a regulatory inquiry.
When a new board arrives, add the declaration and any test reports to the file. If the supplier changes a material, update the file and note the date. This creates a clear history that you can review during an audit or a customer request. The history is just as important as the current documents. It shows that you are actively managing compliance and that you have a process for verifying materials over time.
Red flags to watch:
- The declaration is stored only in email and not in a central file.
- The file does not show which materials were used for each production run.
- The file is not updated when the supplier changes a coating or solder.
Quick reference table for RoHS compliance checks
| Check | What to request | Acceptable evidence |
|---|---|---|
| Material declaration | Written RoHS declaration for each board part number | Declaration lists all materials and restricted substances |
| Test reports | Lab reports for solder, flux, and coating | Report includes lab name, sample ID, and numerical results |
| Solder alloy | Alloy composition and flux declaration | Declaration states tin/copper ratio and flux is compliant |
| Coating | Coating material and flame retardant list | Declaration names the specific coating and additives |
| Traceability | Lot or batch numbers on board and documents | Lot numbers match between board and declaration |
| History | Supplier compliance record and any prior failures | Supplier can provide a history of compliant production runs |
Frequently asked questions
Can I rely on a supplier's "RoHS compliant" statement without documentation?
No. A statement without a material declaration or test report is not sufficient. You need written evidence that lists the materials and restricted substances.
Do I need separate RoHS declarations for solder and coating?
Yes. Solder, flux, and coating are separate materials. Each must be declared individually, and the declaration must list the restricted substances checked.
What if the supplier's test report does not list a detection limit?
Treat the report as incomplete. Request a revised report that includes the detection limit for each restricted substance.
How should I store RoHS compliance records for imported PCBs?
Keep a central file per supplier and part number. Store declarations, test reports, and correspondence. Update the file when materials change.
Do I need third-party testing for every import?
Not for every import. Use third-party testing when the supplier history is unclear, when the declaration is incomplete, or when you need extra assurance for a high-risk order.


